TX16 Bluetooth Receiver Transmitter Audio Apt x HIFI Wireless Adapte Audio SPDIF Optical Fiber For Smartphone PC TV Headphone

TX16 Bluetooth Receiver Transmitter Audio Apt x HIFI Wireless Adapte Audio SPDIF Optical Fiber For Smartphone PC TV Headphone
  • Продавецalatbantusex.us
  • Список ценUS $22.56piece
  • Продажная ценаUS $22.56piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,6 (370)

Oписание продукта


Receive mode: 1: TX16 selects transmit mode/receive mode switch by toggle switch. Check whether it is in ": RX" mode before starting up. Select AUX or SPDIF OUT to connect speakers by toggle switch.2: After the power on, the interface light is on, the red and blue lights flash alternately, enter the pairing state, open the Bluetooth or Bluetooth, search Bluetooth "TX16", click to connect. After the connection is successful, the light will turn on.
3: When you need to connect the second mobile phone, you only need to directly search for Bluetooth "TX16" on your mobile phone or tablet, and click Connect.4: Press twice the multi-function button to reset, clear reconnect.5: The second time you use the product, you only need to turn on the used product at the same time.
APTX Note: The preference for 48KHZ codec (earphones or speakers must also support APT-X) for single connection is to automatically switch SBC CODEC if it is dual connection. Launch mode: 1: TX16 selects transmit mode/receive mode switch by toggle switch. Check whether it is in "TX" mode before turning on. Select AUX or SPDIF IN to connect TV/PC by toggle switch. TV or computer must be set in external speaker mode.:
2: After the power on, the interface light is on, the Bluetooth pairing light is blinking, enter the Bluetooth search mode, and the receiver/Bluetooth headset/Bluetooth speaker is turned on to enter the pairing state. TX16 will automatically select the searched Bluetooth for connection pairing. The successful connection lights up. You can achieve audio transmission.
3: When you need to connect the second device, press the multi-function button and the other LED will flash to enter the search mode. Automatically search for Bluetooth receivers to connect, the light will turn on when the connection is successful.4: Press twice the multi-function button to reset, clear reconnect.5: The second time you use the product, you only need to turn on the used product at the same time.
Colour: black
Material: ABS
Bluetooth version: V4.1, Class II CSR BC8670
Frequency range: 2.402-2.480GHZ
Bluetooth protocol: RX: A2DP AVRCP TX: A2DP
Launch Mode: Support (connects two Bluetooth speakers or headphones at the same time using a CODEC)
Receive mode: support (one for two functions, with two mobile phones)
CODEC: sorting TX: respectively: preferred APT-X, second: SBC, third: APTX-LL, fourth: FastStream RX: SBC
Battery specifications: Built-in 350MA rechargeable lithium battery
Charging power supply: 110-240V AC Adapter 5VDC 300ma
Working temperature: -10-55 degrees
Working hours: AUX: 15 hours, SPDIF: 12 hours
Size: 60*60*20mm
Note: Toggle switch can be arbitrarily selected in the boot state mode. Switching frequency can not be too frequent.
Special Note:
1: When the battery voltage is lower than 3.1V will automatically shut down.
2: In the absence of a paired device, it will shut down after 5 minutes.
3: If you need to use it for a long time, you can connect it to the power cable DC5V and use it while charging. The battery voltage is low or the charging may cause current noise.
4: If you are prompted to enter a pairing password when using TX16, enter "0000".
Packaging Include:
1* TX16 Wireless Adapter
1* Optical fiber cable
1* Audio cable
1* Charging cable
1* User Manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.