For Raspberry pi 3B+ 5inch Display Touch Screen & HDMI Monitor 800 x 480 Dots

For Raspberry pi 3B+ 5inch Display Touch Screen & HDMI Monitor 800 x 480 Dots
  • Продавецalatbantusex.us
  • Список ценUS $39.29piece
  • Продажная ценаUS $39.29piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,9 (722)

Oписание продукта

4inch Resistive Touch Screen LCD, HDMI interface, IPS Screen, Designed for Raspberry Pi

Features

  • 800×480 high resolution
  • Resistive touch control
  • IPS technology, high quality and perfect displaying from very wide viewing angle
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Backlight can be turned off to lower power consumption

Photos

4inch-HDMI-LCD-54inch-HDMI-LCD-84inch-HDMI-LCD-14inch-HDMI-LCD-24inch-HDMI-LCD-34inch-HDMI-LCD-4

Interface

PIN NO. SYMBOLDESCRIPTION
1, 17 3.3V Power positive (3.3V power input)
2, 4 5V Power positive (5V power input)
3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NCNC
6, 9, 14, 20, 25 GNDGround
19TP_SISPI data input of Touch Panel
21TP_SOSPI data output of Touch Panel
22TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching
23TP_SCKSPI clock of Touch Panel
26TP_CS Touch Panel chip selection, low active

External Dimension

Development Resources

Wiki : www.waveshare.com/wiki/4inch_HDMI_LCD

FAQ

Why the LCD doesn\'t work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn\'t work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is recommended to use a 5V/2A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC\'s USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

For more info, please check the wiki page.

PACKAGE CONTENT

Weight: 0.09 kg

  1. 4inch HDMI LCD x 1
  2. HDMI connector x 1
  3. Touch pen x 1
  4. RPi screws pack (4pcs) x 1
  5. Quick start sheet x1

QQ20181111181611

Selection Guide

Part NumberResolutionLCD InterfaceTouch Panel InterfaceFor use with Dimension (mm) Touch Panel TypeToughened Glass CoverIPSSoundMulti Systems DisplayMulti Systems TouchPopular Game ConsolesHow you feel
2.8inch RPi LCD (A) 320×240 I/O I/O Pi As the Pi 3B+ Resistive × × × × × × ★☆
3.2inch RPi LCD (B) 320×240 I/O I/O Pi As the Pi 3B+ Resistive × × × × × × ★★
3.5inch RPi LCD (A) 480×320 I/O I/O Pi As the Pi 3B+ Resistive × × × × × × ★★★
3.5inch RPi LCD (B) 480×320 I/O I/O Pi As the Pi 3B+ Resistive × × × × × ★★★
3.5inch HDMI LCD 480×320 HDMI I/O Pi As the Pi 3B+ Resistive × × ★★★★
4inch RPi LCD (A) 480×320 I/O I/O Pi 94 × 61 Resistive × × × × × ★★★☆
4inch HDMI LCD 480×800 HDMI I/O Pi 99 × 58 Resistive × × × × ★★★★
4.3inch HDMI LCD 480×272 HDMI I/O Pi 106 × 68 Resistive × × × × × × ★★★☆
5inch HDMI LCD 800×480 HDMI I/O Pi 121 × 78 Resistive × × × × × × ★★★★
5inch HDMI LCD (B) 800×480 HDMIUSBNot only Pi 121 × 76 Resistive × × × × ★★★★☆
5inch HDMI LCD (G) 800×480 HDMIUSBNot only Pi 121 × 76 Resistive × × ★★★★☆
5inch HDMI LCD (H) 800×480 HDMIUSBNot only Pi 121 × 76 Capacitive × × ★★★★☆
7inch HDMI LCD 1024×600 HDMI I/O Pi 165 × 107 Resistive × × × × × ★★★★
7inch HDMI LCD (B) 800×480 HDMIUSBNot only Pi 165 × 107 Capacitive × × × × ★★★★☆
7inch HDMI LCD (C) 1024×600 HDMIUSBNot only Pi 165 × 107 Capacitive × × × ★★★★★
7inch HDMI LCD (H) 1024×600 HDMIUSBNot only Pi 165 × 107 Capacitive ★★★★★
10.1inch HDMI LCD 1024×600 HDMI I/O Pi 235 × 144 Resistive × × × × × ★★★★
10.1inch HDMI LCD (B) 1280×800 HDMIUSBNot only Pi 274 × 187 Capacitive × × ★★★★★
10.1inch HDMI LCD (H) 1024×600 HDMIUSBNot only Pi 257 × 162 Capacitive × × × ★★★★☆
11.6inch HDMI LCD (H) 1920×1080 HDMIUSBNot only Pi 285 × 182 Capacitive ★★★★★
13.3inch HDMI LCD (H) 1920×1080 HDMIUSBNot only Pi 330 × 208 Capacitive ★★★★★

Note : 
Pi 3B+ means Raspberry Pi 3 Model B+ 
If the LCD is intended to play videos, please choose the one with HDMI display interface for better experience.
※ the 7inch HDMI LCD (H) (with case) features toughened glass cover, while the 7inch HDMI LCD (H) uses a normal screen cover

Have a look :

QQ20181109114525